20 (16 internal, 4 external) 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports, 10 Gigabit Ethernet uplink modules (optional), 48Gbps Stacking module (optional), 48Gbps Stacking module (optional), Auto-negotiation for speed, duplex mode and flow control, Auto MDI/MDIX, Port mirroring, Flow-based port mirroring, Broadcast storm control, Switch Fabric Capacity 128 Gb/s, Forwarding Rate 95 Mpps, Up to 8,000 MAC Addresses, 256MB of CPU SDRAM, 32MB of Flash Memory, VLAN support for t...
96.73 €+VAT, 122.85 €
58.53 €+VAT, 74.33 €
1x VGA D-SUB 15pin, 2x RJ45, 2x USB
External ports 6Port Gigabit RJ45, 1x USB MNG Port, Internal ports 14 internal full-duplex Gigabit, one connected to each of the blade servers in the BladeCenter unit, Two internal full-duplex 10/100 Mbps ports connected to the management module, Up to 128 IP interfaces per switch
64.38 €+VAT, 81.76 €
29.12 €+VAT, 36.98 €
QLogic 4 Gb Intelligent Pass-thru Module for IBM BladeCenter FRU 43W6720 43W6723
Brocade 20-Port 4 Gigabit SAN Switch Module 32R1820 IBM BladeCenter IB-4020-0002 20Port 4Gb Fiber Channel Switch, Option part number 32R1812, replacement part number (FRU) 32R1820 32R1821 32R1818 32R1819
16 Internal (downlink) ports; 12 External (uplink) ports -universal (E, F, N, D) ports 16/16c SAN Switch model: (16) 16 Gb ports in any internal/external port combination enabled, 16/28c SAN Switch models: 16 internal 16Gb ports and 12 external 16 Gb auto-sensing ports enable, 16 Gbps line speed, full duplex,
1 614.31 €+VAT, 2 050.18 €
24x (16 internal, 4 external) SFP+ port, 48Gbps Stacking module (optional), 384 Gbps end-to-end, full duplex, Fibre Channel ports Switch mode: 12- and 24-port configurations (12-port increment through Ports on Demand [PoD] license); universal (E, F, M, D) ports, Certified maximum 6000 active nodes; 56 switches, 19 hops in Brocade Fabric OS® fabrics; 31 switches, three hops in Brocade M-EOS fabrics; larger fabrics certified as required, Data Traffic Types Fabric switches supporting unicast, Pe...
1 614.31 €+VAT, 2 050.18 €
2x SFP/SFP+ ports to attach SFP/SFP+ transceivers for 1 GbE or 10 GbE connections or SFP+ DAC cables for 10 GbE connections., 2x QSFP+ ports to attach QSFP+ transceivers or DAC cables for 40 GbE or 4x 10 GbE connections. 12x Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel or 10 Gb Ethernet connections or DAC cables for 10 Gb Ethernet connections. One mini-USB RS-232 console port that provides another means to configure the switch module. System LEDs that display the status o...
Total of 30 ports with 288 Gbps full-duplex bandwidth in a single module, Scalability: VLANs: 4096 MAC adresses: 32,000 MAC address table entries ACLs: 5000 QoS queues per port: 8 Link aggregation: Eight links per group, 28 link groups per switch, Base model: Brocade 8470 (IBM 68Y1909) with 16 ports enabled. These ports can be any combination of backplane 10 GbE ports
HP 419329-001 1Gb Ethernet Passthru Module For Cclass Blade System
BM BladeCenter Virtual Fabric 10Gb Switch Module (formerly called BNT 10 Gb Ethernet Expansion Card for IBM BladeCenter) is a high-speed Ethernet component that is installed into a BladeCenter unit that supports high-speed I/O modules, 10port Gigabit SFP+ , Authentication Method: LDAP , RADIUS , TACACS+; Compliant Standards: IEEE 802.1D , IEEE 802.1p , IEEE 802.1Q , IEEE 802.1s , IEEE 802.1w , IEEE 802.1x , IEEE 802.2 , IEEE 802.3ab , IEEE 802.3ad (LACP) , IEEE 802.3ae , IEEE 802.3x , IEEE ...
Line Rate, full-duplex 240Gbps bridging fabric, Non-blocking architecture, Maximum transmission unit (MTU) of up to 9216 bytes (jumbo frames), sFlow monitoring. FCoE Networks on SUS. Updated "show" command to include WWN and MAC addresses from profiles, 100% compatible with current networks: Seamless connection to existing industry standard data and storage networks avoids fork-lift upgrades.
1x USB MNG Port, 2x Stack console,
1x Cisco X2-10GB-SR Compatible 10GBASE-SR X2 850nm 300m DOM Transceiver Module, 1x USB MNG Port, 2x Stack console,
1x VGA D-SUB 15pin, 2x RJ45, 2x USB, IBM BLADECENTER E 8677-3XU, 8677-4SU, BLADECENTER H 1886, 7989, 8852,
2x SFP/SFP+ ports to attach SFP/SFP+ transceivers for 1 GbE or 10 GbE connections or SFP+ DAC cables for 10 GbE connections., 2x QSFP+ ports to attach QSFP+ transceivers or DAC cables for 40 GbE or 4x 10 GbE connections. 12x Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel or 10 Gb Ethernet connections or DAC cables for 10 Gb Ethernet connections. One mini-USB RS-232 console port that provides another means to configure the switch module. System LEDs that display the status o...
Internal ports:
Standard I/O module form factor with fourteen internal 1X SAS ports and four 4X external SAS ports, Connectivity module via CLI, Web Browser, and IBM Storage Configuration Manager, 39Y9195 39Y9193 39Y9192
